With 45+ years of experience in the concrete construction industry, we are a leading rebar fabricator in New York, New Jersey, Connecticut and Pennsylvania. We are experts in custom rebar fabrication and thrive during challenging projects. We can manipulate rebar on site at our NJ facility to create custom lengths, bends and connections based on your high rise construction project requirements.
Our rebar offerings include but are not limited to standard rebar, threaded rebar, and fiberglass rebar. In addition to custom rebar fabrication, we also offer other concrete reinforcement products such as wire mesh, bar supports, couplers, tie wires, bar clips, stud rails and more.
EDC threaded mechanical splicing systems provide reliability and consistency of maintaining load path continuity of the structural reinforcement, independent of the condition or existence of the concrete. Supplied in any length and fabricated to your requirements. American made ASTM A615 reinforcing steel, mill certified. Manufactured to exceed 125% x specified yield strength fy Grade 60. Splice systems are compliant with ACI 318 specifications and AASHTO standard specifications for highways and bridges. All threaded couplers are made from material satisfying ASTM A-108.
EDC threaded mechanical splicing systems are supplied as 2 piece systems, which include a male splice bar and a female setting bar with a coupler attached. Ready to use in sizes #4 through #11.
Benefits: Mechanical connections offer greater structural integrity. Mechanical splices offer strength and toughness during man-made, seismic or other natural events. Mechanical splicing systems eliminate projecting rebars, protect the safety of workers, reduce the cost of rebar and reduce bar congestion.
A615 grade 60 reinforcing bars are the most widely used type and grade of reinforcing steel. Available in a wide range of sizes.
EDC couplers are designed to eliminate protruding rebar and extend rebar without damaging formwork. Standard couplers have an internal positive stop to ensure proper thread engagement. Couplers may be supplied with or without a flange.
| Size | Thread Size | Weight (lbs) | Length (in) | O.D. (in) | Flange (optional) |
|---|---|---|---|---|---|
| #4 | 1/2" - 13NC | 0.23 | 2" | 7/8" | 2"x2" |
| #5 | 5/8" - 11NC | 0.28 | 2 1/4" | 1" | 2"x2" |
| #6 | 3/4" - 10NC | 0.39 | 2 3/8" | 1 1/8" | 2"x2" |
| #7 | 7/8" - 9NC | 0.55 | 2 3/4" | 1 1/4" | 2"x2" |
| #8 | 1" - 8NC | 0.99 | 3 3/8" | 1 1/2" | 2"x2" |
| #9 | 1 1/8" - 7NC | 1.66 | 3 7/8" | 1 5/8" | 2 1/2"x 1/2" |
| #10 | 1 1/4" - 7NC | 2.57 | 4 3/8" | 2" | 2 1/2"x 1/2" |
| #11 | 1 3/8" - 6NC | 2.60 | 4 7/8" | 2" | 2 1/2"x 1/2" |
EDC positional couplers are especially convenient when rebar cannot be rotated to engage threads. Positional couplers are tapped through to allow full positioning on one bar, then rotation back on to the other bar.
| Size | Thread Size | Weight (lbs) | Length (in) | O.D. (in) | Flange (optional) |
|---|---|---|---|---|---|
| #4 | 1/2" - 13NC | 0.23 | 2" | 7/8" | 2"x2" |
| #5 | 5/8" - 11NC | 0.28 | 2 1/4" | 1" | 2"x2" |
| #6 | 3/4" - 10NC | 0.39 | 2 3/8" | 1 1/8" | 2"x2" |
| #7 | 7/8" - 9NC | 0.55 | 2 3/4" | 1 1/4" | 2"x2" |
| #8 | 1" - 8NC | 0.99 | 3 3/8" | 1 1/2" | 2"x2" |
| #9 | 1 1/8" - 7NC | 1.66 | 3 7/8" | 1 5/8" | 2 1/2"x 1/2" |
| #10 | 1 1/4" - 7NC | 2.57 | 4 3/8" | 2" | 2 1/2"x 1/2" |
| #11 | 1 3/8" - 6NC | 2.60 | 4 7/8" | 2" | 2 1/2"x 1/2" |
